BACK TO MustangSteve's MAIN PAGE
ALUMINUM RADIATORS
for 65-70 Mustang & Cougar
Now offering double tube high-efficiency Aluminum Radiators for 65-70 Mustangs and Cougars.  These are very high quality parts. TIG welded stamped aluminum tanks, high density fin count, double row of 1" tubes, billet machined filler neck, thick sturdy mounting flanges and hose connections.  These will easily handle any small block V8 you care to stuff into the Mustang.  These are made in China.  No excuses, though.  These are the best quality radiators I have ever seen, and I am pretty darn picky with items that I sell and use.  One year warranty against defects. Damaged parts not warranted.

NOTE: The 20" radiator is an easy upgrade for the 65-66 Mustang which comes stock with a 17" radiator.  It requires four new holes to be drilled for mounting but goes right in the same place as the smaller 17". Be advised that if you have A/C on your car, you may have interference issues with the freon lines where they go through the car's core support, and you will have to fabricate some different condenser mounting brackets, as the condenser brackets bolt onto the radiator mounting bolts.  Also may require trimming of battery tray, or get one of my custom trays.

MS65-I6AT-L        Direct fit 17" wide core for 65-66 V8 with automatic trans. (six cylinder)
MS65-V8AT-L       Direct fit 17" wide core for 65-66 V8 with lower hose on driver side, automatic trans. (can be used w/manual)
MS65-V8AT-R       Direct fit 17" wide core for 65-66 V8 with lower hose on passenger side, automatic trans. (can be used w/manual)
MS65-V8MT-R      Direct fit 17" wide core for 65-66 V8 with lower hose on passenger side, manual trans.

MS67-V8AT-L       Direct fit 20" wide core for 67-69 V8 with with lower hose on driver side, automatic trans. (can be used w/manual)
MS67-V8AT-R     Direct fit 20" wide core for 67-70 V8 with lower hose on pasenger side, automatic trans. (can be used w/manual)

ONE LOW PRICE FOR ANY OF THE RADIATORS LISTED   $299 plus $25 shipping in USA. 
TX residents must add $24.67 sales tax
Sorry - no international shipping available at this time for any radiators.
Discount available on shipping for two or more radiators to same address. Save $15.00

Fox Mustang aluminum radiators also available - inquire.
Two rows of 1" tubes as seen through lower hose fitting.
17" Radiator as seen from rear
Heavy duty mounting flanges
TIG welded drain valve included
Machined billet fill neck
Thick tubing used for hose fittings
Inner baffle in top tank helps water circulate evenly across all tubes for better cooling.
Custom battery tray available for fitment of 20" or 24" radiator in 65-66 Mustangs.  Made from 65-66 bottom brace and 67-70 top tray.  These are built from heavy duty, highest quality, USA made trays, not the crinkled up ones you see on ebay for $10 or less.  These allow iinstallation of the 67-70 style j-bolt battery hold-down setup (not included with tray) 
Note: You can trim the existing tray in a 65-66 to gain same clearance, but these allow use of the later model j-bolt setup.
$60.00 plus $8.50 shipping.
For order info, please return to main page. 
For best results and proper fitment, please email MustangSteve for details prior to ordering any radiator product.
Radiator core is 2-1/4" thick.
20" Radiator
MS67-V8AT-R shown