Rear Caliper Mounting Kit – Large Bearing for 1994-2004 Cobra 11.65″ Rear Brakes

$198.00

Rear Caliper Mounting Kit – large bearing      $170.00
1994-2004 Cobra 11.65″ rear brakes

REQUIRES AT LEAST 15″ WHEELS (FITS MOST 15″ WHEELS) CUSTOMER MUST VERIFY FITTING

Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing.  Versailles 9″ uses large bearing.

American Racing Torque Thrust II 17” will not clear Cobra or GT calipers.

Click Here for Installation Instructions

Includes:
Caliper Mounting Brackets
Brackets replace bearing retainer and bolt to housing w/existing bolts
Grade 8 bracket bolt kit
Caliper mounting bolts w/ flanged head
Fits 9″ rear including Versailles and New Style (both 2-3/8″ & 2-1/2″ brake offset
3.150″ diameter bearing with 3.50″ x 2.375″ bolt pattern with 1/2″ bolt holes
3.150″ diameter bearing with late Ford bolt pattern with 3/8″ bolt holes

(Brake calipers and rotors in Picture are not included – shown for reference only).

94-04 Cobra hoses:  Note they have a 3/8” SAE inverted flare on one hose and 7/16” inverted flare thread on the opposite side. (On frame end of the hose)  Depending on the year of the calipers, the banjo bolts can be fine or coarse thread.

Description

BRACKET KITS for 8″ or 9″ Ford Rear Ends

Note:  All 65-73 Mustang 8″ & 9″ rear ends were small bearing. Versailles 9″ uses large bearing.

15″ wheels required (Fits Most 15″ Wheels) CUSTOMER MUST VERIFY FITTING

DISCLAIMER

These items are considered race only, or off-road.  Improper installation or any type of brake failure can cause serious injury or death.  Car owner assumes all risk of
failure of any kind upon installing these brake parts.

MustangSteve is not responsible for any consequences should a failure of any kind occur.  These parts must be installed by someone who is competent in installing and
modifying automobile brake systems.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.